Operator Interface Software - Oce Arizona 200 GT User Manual

Operator Interface Software

Operator Interface Software
Introduction
The Arizona 200/250 GT software interface is displayed on the LCD monitor that is
part of the Operator Control Station. The interface has five main working modules
that are accessed by tabs located at the bottom of the display. Click on these tabs with
the mouse to access the modules. Print Job Control is the default module displayed
when the software interface has finished loading after the printer is switched on or
reset.
The Print Job Control display is divided into functional and status areas. The
functional areas supports all operator input necessary to operate, maintain and
service the printer. The status areas are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device. For operations that require operator input, the
mouse is used to select either numeric characters from a virtual keypad or
alphanumeric charaters from a virtual keyboard. These virtual input screens are
displayed on the interface LCD monitor when data entry is required.
Illustration
[35]
[35] Interface Tabs
Operator Interface Module Tabs
[19]
[19] Interface Modules
Component
Print Job Control
(Print tab)
Printer Counters
(Counters Tab)
Printer Settings
(Settings tab)
Service and
Diagnostics
54 Chapter 4 How to Navigate the User Interface
Function
Provides management of all aspects of working with print
jobs. It also controls some features of the printer and provides
access to Roll Media print controls (if that option is installed).
Provides information about the amount of ink consumed, the
amount of media printed and the number of print jobs started.
Also provides counters for the UV lamp bulbs use.
Displays information about, and also allows you to change
various aspects of the printer: Date and Time, Network
Connections, User Interface, Printer Settings, and Roll Media
Settings (if that option is installed).
This area is reserved for use by trained field service
technicians only.
(1 – 2)