Oce Arizona 250 GT User Manual page 170

How to Clean the Rubber Capstan
[86]
[86] Wet fresh cloth with alcohol
Note: Note: It may be difficult to tell whether or not all the ink has left the surface.
Continue to wet and wipe the capstan surface until the cloth does not show any sign
of ink color.
[87]
[87] Wipe up remainder of ink
Allow adequate time for capstan to dry.
4.
Note: If the scrubbing action leaves fibres from the cloth on the surface, wait for the
surface to dry completely, then follow the procedure listed above for Removing Solid
Debris.
170 Chapter 10 Printer Maintenance