Oce Arizona 250 GT User Manual page 103

Roll Media Option Specifications
Leader waste is the amount of media that cannot be printed between the roll media
platen and the take-up media roll. This waste is produced every time media is loaded,
taped to the take-up core and initialized in preparation for the first print. Trailer
waste is the media that cannot be printed at the end of the supply media roll. This
will vary slightly depending on the attachment method that was used to secure the
media to the media core.
Trailer Waste (minimum possible): 920mm (36 inches)
Trailer waste is the media that cannot be printed at the end of the supply media roll.
This will vary slightly depending on the attachment method that was used to secure
the media to the media core.
103