Roll Media Option Specifications - Oce Arizona 250 GT User Manual

Roll Media Option Specifications

Roll Media Option Specifications
Introduction
The Roll Media Option available for the Arizona 250 GT printer allows the use of
various flexible media that are supplied on a roll. The specifications for print area
available and the amount of waste associated with the use of roll media is indicated
in this section.
Note: The Arizona 250 GT and the Roll Media Option must be operated in
accordance with the environmental conditions specified in the Arizona 250 GT Site
Preparation Guide and all safety requirements noted in this document.
Media Size Supported
Width (Max.): 2.2m (86.6")
Width (Min.): 0.9mm (36")
Roll Diameter (Max.): 240mm (9.45")
Core Inner Diameter: 76.2mm (3")
Print Size Supported
2.190m (86.2")
This allows for a minimum 5mm (0.2") border. This is necessary to ensure the platen
is not contaminated with ink due to possible media tracking errors. Cured and
uncured ink on the platen will have a serious effect on printer performance. If an
image exceeds the 5mm border requirement, printing will not be allowed to proceed.
Maximum Supported Weight
[33]
Media Width (mm)
900 ≤ x < 1220
1220 ≤ x < 1480
1480 ≤ x < 1780
1780 ≤ x ≤ 2200
Leader & Trailer Waste
Leader Waste: 560mm (22 inches)
102 Chapter 6 How to Operate the Roll Media Option
Max. Weight kg (lbs)
28 (62)
40 (88)
45 (100)
50 (110)