Oce Arizona 250 GT User Manual page 50

Operator Interface Hardware
[17] Hardware Interface Components
Component
(14) Carriage Guard The Carriage Guard protects the Operator from exposure to
(15) Vacuum
Shut-off Valves
(16) Waste Tray
Status of Beacon Light States
The status light indicates the following printer status to the operator.
[18]
[18] Status Light
Beacon Status Light
Green Off
Green On
Emergency Stop Effects
Note: There are three Emergency Stop buttons, one on the control station podium
and one on each end of the gantry. The AC power On/Off switch can also function as
an emergency stop. There are more details on the Emergency stops in the Interlock
section (see 'Interlock Safety System' on page
Activating an Emergency Stop will disable the following:
Carriage motion
Gantry motion
UV curing lamps
Ink pumps
Thermal fluid (coolant) pump
50 Chapter 4 How to Navigate the User Interface
Function
UV light and it also protects the lamps and the carriage by
stopping all motion if it encounters an obstacle in the path
of the carriage.
On top of the carriage are vacuum shut-off valves can be
shut off to avoid ink drips when the printer is turned off.
They also allow longer purges to select printheads (those
not shut off).
The waste ink tray is located below the printhead
maintenance station. A manual valve allows the operator to
drain the waste ink to a portable container for disposal .
Definition
Printer interlock system
or the emergency stop
buttons have been
triggered. No motion can
be initiated.
Printer is functional and
ready to initiate motion.
Possible Conditions
Maintenance station door
has been opened or one
the emergency stop
buttons has been
triggered.
29).
(3 – 3)