Oce Arizona 250 GT User Manual page 151

Illustration
[75]
[75] Ink Removal Technique
How to Clean the Carriage Underside
Slide the maintenance station cover plate out from under the carriage to reveal the
1.
maintenance station.
Press switch 2 to raise the carriage to its maximum height.
2.
Wrap a clean poly wipe cloth around your index finger.
3.
Attention: In the next step, make sure that you do not touch the nozzles of the
printheads. If you happen to touch one with the cloth, you must perform a
printhead maintenance. Note that contact with the printhead by any object other
than the suction-head used for maintenance can cause damage to the nozzles and
result in poor image quality or possibly require a printhead replacement.
Slide the cloth along the metal plate between the first two printheads to remove any
4.
ink that has accumulated.
Reposition the wipe so that a clean area is wrapped around your finger.
5.
Proceed to the next space between printheads and slide the clean area of cloth along
6.
the metal plate.
Repeat steps 3 to 6 until all ink is removed from the spaces between printheads. Use
7.
a new cloth wipe, if necessary.
Slide the maintenance station cover to the closed position.
8.
Result
Printer is ready to print quality images.
Clean Carriage Underside
151