Oce Arizona 250 GT User Manual page 161

Unscrew the cap at the top connection to the old filter (the blue valve with the circle
6.
shown in the photo above) and screw it into the top connection of the new filter,
being sure to install the filter in the proper direction. Place the cap that came with the
new filter on the old filter to prevent ink from leaking out of the old filter.
Repeat the previous step for the bottom connection. Wipe off any spilled ink
7.
Insert the new filter in the metal retainer clips. Be careful not to pinch the ink lines.
8.
Close the sliding maintenance station cover to enable the ink pumps.
9.
Check
Check the new filter to make sure there are no ink leaks.
1.
Replace the ink filter enclosure cover.
2.
Change Ink Filters
161