Oce Arizona 250 GT User Manual page 129

Arizona 250 GT Ink
block and printheads. An internal thermostat on each printhead and one on the
reservoir block provides temperature feedback.
The condition of the printheads is maintained by periodic cleaning at the
maintenance station on the gantry. During this procedure the operator suctions the
printhead nozzle plates, removing ink and possible contaminates in the process
(details of this procedure are available in the Maintenance sectionPrinthead
Maintenance).
UV Flush
UV Flush is used as a cleaning agent for the printheads or to flush the ink lines of
ink for a printer relocation or long-term storage.
Attention: Do not install inks that are not certified by Océ Display Graphics
Systems for use in this printer, as this may result in:
Poor quality prints, uncured ink in the finished prints (NOTE: This is a serious
health and safety risk!), and permanent damage to the ink pumps, filters, ink lines
or printheads.
129