Oce Arizona 250 GT User Manual page 9

"Safety Guidelines for Ink Materials" offers advice in the proper handling of UV
inks;
"Interlock Safety System" explains the safety features built in to the printer that
prevent and minimize access to Mechanical, Electrical, Thermal and UV hazards;
and
"UV Curing System Safety" presents warning about the dangers of exposure to
UV light. Some of the material from that section are duplicated here.
UV Curing System Safety
Caution: UV Light Hazard: Wear Eye and Skin Protection. Eyewear,
Gloves, and Long Sleeves are essential for Users and Bystanders. Special
restrictions and protective measures are essential - These include the use of
Eye and Dermal (skin) Protection. Industrial Protective Eyewear with
lenses that block both UVA and UVB must be used. Long sleeved work
clothes and gloves are essential to reduce the Skin's exposure to UV
emissions. Avoid looking directly at UV lamps.
Caution: Warning for Seated Individuals: The UV Emissions and Blue
Light Emissions profile of the Arizona 250 GT is at its worst for individuals
in a seated position (Table Height of 90cm). Remove all chairs within 5
metres (16 feet) of the printer.
UltraViolet Light Radiation Hazards Emission:
Effective UV-irradiance Emission Category of Arizona 250 GT According to 7.1 of
EN12198-1:2000 ( Category 2 ) - Special restrictions and protective measures are
essential - These include the use of Eye and Dermal (skin) Protection. Industrial
Protective Eyewear with lenses that block both UVA and UVB must be used. Long
sleeved work clothes and gloves are essential to reduce the Skin's exposure to UV
emissions.
Blue Light Radiation Hazards Emission (Visible radiation in the range of 400nm
to 700nm (Blue Light 300nm - 700nm):
Effective Irradiance respective the Effective Radiance Emission Category of Arizona
250 GT According to 7.1 of EN12198-1:2000 (Category 1).
Preface
9