Relay Request Transmission Using F-Codes - Sharp MX-2630N User Manual

FACSIMILE►PERFORMING F-CODE COMMUNICATION

RELAY REQUEST TRANSMISSION USING F-CODES

This function sends a fax to an F-code relay broadcast memory box in another machine and have that machine relay the
fax to multiple destination machines.
When the destination machines are far from your machine, sending the fax to a relay machine that is close to the
destination machines can help reduce telephone charges. A relay request transmission can be used in combination with
the timer transmission function to further reduce cost.
SPECIFYING THE TIME FOR COMMUNICATION (page 4-100)
►
The machine
F-code relay broadcast
transmission
Sub Address: AAAAAAAA
Passcode: XXXXXXXX
• F-code (sub-address and passcode) and the destination in the F-code relay broadcast memory box of the recipient
machine should be verified by the recipient in advance.
• Before using this function, program the destination machines in the F-code relay broadcast memory box in the relay
machine.
• It is not necessary for the destination machines to support F-code communication.
• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the
relay machine. The relay machine bears the cost of sending the fax to each of the destination machines.
• If necessary, this function can be used in combination with a broadcast transmission or timer transmission. It is convenient
to store this function in a program.
When faxes forwarded using this function are printed at the forwarding destination, the date and time of reception cannot be
printed on the faxes. ("Receiving Date & Time Print" is disabled.)
To create F-code memory boxes:
Create in "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Fax Settings] → [F-Code Memory Box].
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-82)
► DOCUMENT GLASS (page 1-84)
The fax is transmitted in sequence to the end
receiving machines registered in the F-code relay
broadcast memory box.
Receiving machine
F-code relay
broadcast memory box
Box Name: BBBB
Sub Address: AAAAAAAA
Passcode: XXXXXXXX
Receiving machines are programed in
this box
4-119
Forward Destination
Send