Utility-System Reset-Reset By The Command - Panasonic KX-TDA100 Pc Programming Manual

2.6 Utility
2.6.17 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD
memory card, and resets the connected PBX.
This option is only available at Installer level.
2 copies of each of the main system files can be stored on the SD memory card. The names of these
files are as follows:
KX-TDA30
File Name
DSSYS
DSSYS_S
PSMPR
PSMPR_S
KX-TDA100/KX-TDA200
File Name
DSYS
DSYS_SUB
PMPR
PMPR_SUB
KX-TDA600
File Name
DLSYS
DLSYS_S
PLMPR
PLMPR_S
When new DSYS/DSSYS/DLSYS and PMPR/PSMPR/PLMPR files are transferred from a connected
PC to the SD memory card using the File Transfer PC to PBX (SD Card) utility (see 2.6.2 Utility—
File Transfer PC to PBX (SD Card)), they are stored as the backup files. To use these files on the
PBX, it is necessary to first swap them with the currently active files on the SD memory card.
Requirements
• This utility only functions on PBXs version 1.005 and later.
92 PC Programming Manual
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of
the PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of
the PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the EMPR board of
the PBX.
Backup PBX program file