Value Range
8 × n (n=9–20) ms
Maintenance Console Location
2.8.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Minimum MAKE Width
Specifies the minimum length of the make signal in a pulse dial.
Value Range
8 × n (n=1–5) ms
Maintenance Console Location
2.8.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
Flash—Flash Detection
Enables the PBX to detect a hookswitch flash signal sent from an E1 line.
Value Range
Disable, Enable
Maintenance Console Location
2.8.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
Flash—Minimum BREAK Width
Specifies the minimum length of the break signal in a flash signal sent from an E1 line.
2.8 [1] Configuration
PC Programming Manual
239