Panasonic KX-TDA100 Pc Programming Manual page 492

2.10 [3] Group
DND Mode
Specifies whether extensions in DND mode ring when a call is received at the incoming call
distribution group.
Value Range
No Ring, Ring
Maintenance Console Location
2.10.13 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.11.3 [4-1-2] Wired Extension—FWD/DND
2.11.12 [4-2-2] Portable Station—FWD / DND
Feature Guide References
1.2.2.2 Group Call Distribution
Tenant Number
Specifies the tenant to which the incoming call distribution group belongs, to determine the Time
Table and the audio source for the group. (The tenant number corresponds to the Time Table
number.)
Value Range
For KX-TDA30/KX-TDA100/KX-TDA200:
1–8
For KX-TDA600:
1–32
Maintenance Console Location
2.10.13 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.9.3 [2-2] Operator & BGM
2.9.5 [2-4] Week Table
2.13.6 [6-6] Tenant—Music On Hold
Feature Guide References
1.13.4 Music on Hold
2.2.3 Tenant Service
COS
Specifies the COS of the incoming call distribution group. Depending on the COS, calls from certain
extensions are restricted as determined by the Internal Call Block feature. Also, when calls are
forwarded or overflowed to a trunk, the TRS/Barring assigned for the COS of the incoming call
distribution group applies.
492 PC Programming Manual