Panasonic KX-TDA100 Pc Programming Manual page 20

1.2 PC Programming
Notice
1.
During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the
system is reset for some reason, all the system data in RAM will be lost. However, if system
data has been saved to the SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon
before resetting the PBX or turning off the power, or (2) exit the Maintenance Console so
that the PBX automatically saves the system data.
2.
The Maintenance Console cannot be used to program the PBX when the PBX is being
powered by the backup batteries (for example, during a power cut). This is to prevent
damage to the SD Memory Card that may occur if the backup battery power runs out while
data is being written to the card.
3.
The PC will not perform any shutdown operation, or enter the power-saving system standby
mode while the Maintenance Console is connected to the PBX.
To perform either of the operations above, first close the connection to the PBX.
CAUTION
Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause
the PBX to fail to start when you try to restart the system.
20 PC Programming Manual
The system menu appears. You may now begin
programming the PBX.