8] Ars; 8-1] System Setting - Panasonic KX-TDA100 Pc Programming Manual

2.15 [8] ARS

2.15 [8] ARS

2.15.1 [8-1] System Setting

Automatic Route Selection (ARS) automatically selects the appropriate carrier at the time a trunk call
is made, according to the programmed settings. The user-dialled number will be checked and
modified in order to connect it to the appropriate carrier.
ARS Mode
Selects the condition to determine when to operate ARS.
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using Idle Line
Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using Idle Line
Access, Trunk Access, or S-CO Line Access method.
Maintenance Console Location
2.15.1 [8-1] System Setting
Programming Manual References
None
Feature Guide References
1.5.5.3 Trunk Access
1.10.1 Automatic Route Selection (ARS)
Mode When Any Carrier is not programmed for the Dial
Selects what happens when the dialled number is not found in Leading Number in 2.15.2 [8-2]
Leading Number.
Value Range
Disconnect: the line will be disconnected.
Local Access: the dialled number will be handled by Idle Line Access method.
Maintenance Console Location
2.15.1 [8-1] System Setting
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
736 PC Programming Manual