Panasonic KX-TDA100 Pc Programming Manual page 175

Feature Guide References
None
Networking Data Transfer
Enables transmission of extension status data to connected PBXs in a network. This setting is only
available when Port Type on this screen has been set to QSIG-Slave or QSIG-Master.
A maximum of two ports of each BRI card can be assigned to transmit extension status information.
Value Range
No, Yes
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
2.16 [9] Private Network
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
ISDN Extension
Parameters for ISDN Extension are not applicable for BRI ports assigned as CO ports.
Shelf (KX-TDA600 only)
Indicates the shelf position (reference only).
Value Range
Shelf number
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
None
Slot
Indicates the slot position (reference only).
Value Range
Slot number
2.8 [1] Configuration
PC Programming Manual 175