Utility-Ps Information; Utility-System Reset-Reset By The Command - Panasonic KX-TAW848 Programming Manual

• To display information on a single card, select the slot number and name of that card.
• To display information on all matching cards, select "ALL".
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic
screen refresh.
4.
Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5.
Click Stop to end monitoring.
2.5.10 Utility—PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available at Installer level.
The displayed items are as follows:
Item
PS No.
Extension Number
Location—Slot
Location—Port
To view PS information
1.
From the Utility menu, select PS Information.
2.
Click Refresh.
2.5.11 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD
memory card, and resets the connected PBX.
This option is only available at Installer level.
2 copies of each of the main system files can be stored on the SD memory card. The names of these
files are as follows:
File Name
DSSYS
DSSYS_S
PSMPR
Description
PS location number.
Only registered PSs will be displayed.
Extension number of the PS.
Slot number of the CS that the PS is registered with.
Port number of the CS that the PS is registered with.
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of
the PBX.
2.5 Utility
PC Programming Manual 49