Panasonic KX-TDA100 Pc Programming Manual page 744

2.15 [8] ARS
Authorisation Code for Tenant
Specifies an Authorisation code for each tenant. The Authorisation codes can be added to the user-
dialled number by specifying "A" command in Modify Command on the Carrier tab.
Authorisation Code for Tenant—Tenant 1–Tenant 32
Specifies the Authorisation code of each carrier for each tenant.
Note
For the KX-TDA30/KX-TDA100/KX-TDA200, only up to 8 tenants are available.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.15.6 [8-5] Carrier
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
744 PC Programming Manual