Utility-System Reset-Reset By The Command - Panasonic KX-TAW848 Features Manual
Advanced hybrid & wireless pbx
Hide thumbs
Also See for KX-TAW848:
- Features manual (484 pages) ,
- Programming manual (480 pages) ,
- Feature manual (250 pages)
Table of Contents
Advertisement
4.5 Utility
To view PS information
1.
From the Utility menu, select PS Information.
2.
Click Refresh.
4.5.10 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD
memory card, and resets the connected PBX.
This option is only available at Installer level.
2 copies each of the main system files can be stored on the SD memory card. The names of these files are
as follows:
File Name
DSSYS
DSSYS_S
PSMPR
PSMPR_S
When new DSSYS and PSMPR files are transferred from an attached PC to the SD memory card using the
File Transfer PC to PBX (SD Card) utility (see "4.5.2 Utility—File Transfer PC to PBX (SD Card)"), they are
stored as the backup files. To use these files on the PBX, it is necessary to first swap them with the currently
active files on the SD memory card.
Requirements
•
This utility functions on PBXs with MPR version 1.005 or later.
•
On earlier versions, the reset request confirmation screen will be displayed, and files will not be
updated.
To update system files and reset the PBX
1.
From the Utility menu, point to System Reset and then click Reset by the Command.
2.
Choose whether to back up current system data or not.
•
Click SD Backup to back up the current system data to the SD memory card before proceeding.
Select this if you intend to use the current system data unchanged after reset.
•
Click Skip to continue without backing up.
Select this if you intend to replace the current system data with data that was uploaded from the
PC.
The second screen will be displayed. A list of matching files found on the SD memory card, with dates
and times, is shown at the top.
3.
Select whether to replace the DSSYS and PSMPR files or not.
When no backup file is found, the corresponding options are not available.
4.
Click OK.
A confirmation screen will be displayed.
256
Feature Guide
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of
the PBX.
Backup PBX program file
Advertisement
Table of Contents
