Panasonic KX-TDA100 Pc Programming Manual page 422

2.9 [2] System
Feature Guide References
1.17.10 External Relay Control
Accept the Call from DISA
Enables reception of calls from DISA.
Value Range
Disable, Enable
Maintenance Console Location
2.9.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.11.10 [4-2-1] Portable Station—Extension Settings—Main—COS
2.12.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
Remote Operation by Other Extension
Allows the Walking COS feature to be used from a remote location (inside the PBX, or outside the
PBX using DISA).
Value Range
Allow, Deny
Maintenance Console Location
2.9.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.11.10 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Guide References
1.9.5 Walking COS
Accept Wireless XDP Parallel Mode Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Value Range
Allow, Deny
Maintenance Console Location
2.9.11 [2-7-1] Class of Service—COS Settings
422 PC Programming Manual