Panasonic KX-TDA100 Pc Programming Manual page 575

Slot
Indicates the slot position of each extension card (reference only).
Value Range
Slot number
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
Port
Indicates the port number (reference only).
Value Range
Port number
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.5 [1-1] Slot—Port Property - Extension Port
Feature Guide References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
2.11 [4] Extension
PC Programming Manual 575