3-1-4] Dialling Plan - Panasonic KX-TDA100 Pc Programming Manual

2.10 [3] Group

2.10.4 [3-1-4] Dialling Plan

The PBX sends all of the dialled digits at once after an extension user completes dialling. The PBX
can recognise the end of dialling when the dialled telephone number starts with the programmed
leading number and contains the programmed total number of digits.
When the PBX recognises the end of dialling to an analogue trunk, the PBX cancels the muting of
the caller's voice sent to the analogue trunk immediately. If the PBX cannot recognise the end of
dialling, the PBX mutes the caller's voice sent to an analogue trunk from the time at which the last
digit is dialled until the analogue trunk inter-digit timer expires.
4 tables can be programmed, each with a maximum of 50 leading numbers. Select the table to
programme from the Dialling Plan Table list.
To assign a set of leading numbers automatically, click Auto Assign.
Leading Number
Specifies the leading number to be regarded as the beginning of dialling.
Value Range
Max. 32 digits (consisting of 0–9, *, #, N [2,3,4,5,6,7,8,9], P [0, 1], and X [0-9, *, and #])
Maintenance Console Location
2.10.4 [3-1-4] Dialling Plan
Programming Manual References
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Analogue CO First Digit
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Analogue CO Inter-digit
2.10.1 [3-1-1] Trunk Group—TRG Settings—Main—Dialling Plan Table
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
Removed Number of Digits
Specifies the number of leading digits of the dialled number to be removed.
Value Range
0–15
Maintenance Console Location
2.10.4 [3-1-4] Dialling Plan
Programming Manual References
None
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
478 PC Programming Manual