Panasonic KX-TDA100 Pc Programming Manual page 693

Feature Guide References
None
CO-CO with DISA—Return to DISA Top Menu by DTMF "*"
Enables a trunk caller to return to the DISA top menu by pressing " " while hearing a ringback,
reorder, or busy tone. If disabled, retrying the call is possible by pressing " ".
Value Range
Disable, Enable
Maintenance Console Location
2.12.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Guide References
None
Option 2
DISA Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call
for a DISA trunk-to-trunk conversation established through an analogue trunk.
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the MSG card (KX-TDA30) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) to "OUS", then "INS".
Value Range
Fixed: The number of times of a tone pattern (a set of tone-on and tone-off) that the PBX receives is
fixed to 4 times in the ranges of:
A
B
, = 100–1300 ms,
A B
Option: The tone pattern that the PBX receives is optional as specified in DISA Cyclic Tone Option
on this screen.
Maintenance Console Location
2.12.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.8.41 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)
C C
C
D D
= 90 ms,
C A
D
= 90 ms
D B
2.12 [5] Optional Device
PC Programming Manual 693