Panasonic KX-TDA100 Pc Programming Manual page 177

Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
2.8.15 [1-1] Slot—Port Property - BRI Port—Connection Command
Feature Guide References
1.21.1.11 ISDN Extension
ISDN TE Power
Enables the PBX to supply power to the ISDN TE (Terminal Equipment). This setting is only available
when Port Type on this screen is set to Extension.
Value Range
Disable, Enable
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.11 ISDN Extension
Ring Mode (ISDN MSN Last No. 0 or 00)
Selects the ring mode when receiving an incoming call with an MSN ending with "0" or "00". This
setting is only available when Port Type on this screen is set to Extension.
Value Range
Ring All Extension for MSN: Ring all ISDN extensions that are addressed with MSN.
Ring an Extension for MSN: Ring only one of the ISDN extensions that are addressed with MSN.
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
2.8 [1] Configuration
PC Programming Manual 177