2-4] Week Table - Panasonic KX-TDA100 Pc Programming Manual

2.9 [2] System
2.9.5

[2-4] Week Table

A specific time mode (day, night, lunch, or break) can be selected for operation depending on the time
of day. The time mode can be switched either automatically or manually. Select the desired switching
mode from the Time Service Switching Mode option.
Time Table numbers correspond to tenant numbers (for example, Tenant 1 uses Time Table 1). Select
the desired Time Table from the Time Table No. list.
When in Automatic Switching mode, the time modes of the tenant are switched as programmed in the
corresponding Time Table. Manual switching is possible only from an authorised extension
(determined by COS).
• To adjust the currently displayed Time Table, click and drag the divisions between two time
periods.
• To programme the time blocks of the currently displayed Time Table, including adding or
deleting time blocks, click Time Setting.
370 PC Programming Manual