Panasonic KX-TDA100 Pc Programming Manual page 342

2.8 [1] Configuration
Value Range
Disable, Enable
Maintenance Console Location
2.8.48 [1-3] Option
Programming Manual References
None
Feature Guide References
None
New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Specifies whether a PRI23 card is automatically set to ISDN Standard mode or T1-LCOT mode when
it is installed for the first time.
Value Range
ISDN Standard mode: The CCBS, CF, CT, and Centralised VM features are supported. DIL and DID
call distribution are available for the D channel.
T1-LCOT mode: DIL and DID call distribution are available for all 23B channels. The CCBS, CF, CT,
and Centralised VM features are not available in this mode.
Maintenance Console Location
2.8.48 [1-3] Option
Programming Manual References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.30.4.3 Call Forwarding (CF)—by QSIG
1.30.4.4 Call Transfer (CT)—by QSIG
1.30.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG
1.30.5.2 Centralised Voice Mail
342 PC Programming Manual