Panasonic KX-TDA100 Pc Programming Manual page 670

2.11 [4] Extension
Programming Manual References
None
Feature Guide References
2.2.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS/Barring level to be used temporarily on a certain extension.
Value Range
1–7
Maintenance Console Location
2.11.17 [4-3] DSS Console
Programming Manual References
None
Feature Guide References
1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
1.9.4 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.
Value Range
1–8
Maintenance Console Location
2.11.17 [4-3] DSS Console
Programming Manual References
None
Feature Guide References
2.2.4 Time Service
Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the delayed ringing setting for calls arriving at an SDN button.
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
2.11.17 [4-3] DSS Console
670 PC Programming Manual