Panasonic KX-TDA100 Pc Programming Manual page 138

2.8 [1] Configuration
Value Range
64 + 16 × n (n=0–11) ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
None
Pulse / DTMF Dial—Pulse Inter-digit Pause
Specifies the length of the pulse inter-digit pause. This allows the telephone company to have enough
time to accept the dialled digits correctly.
Value Range
630 ms, 830 ms, 1030 ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
None
Low Speed Pulse Dial—Pulse % Break
Specifies the % break for a low speed pulse dial. This is the ratio between the break (on-hook) signal
and make (off-hook) signal in a pulse dial.
Value Range
Other, 60 %, 67 %
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
2.8.11 [1-1] Slot—Port Property - LCO Port
Feature Guide References
None
138 PC Programming Manual