Panasonic KX-TDA100 Pc Programming Manual page 771

Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
DDI / DID Destination—Day, Lunch, Break, Night
Specifies the DDI/DID destination in each time mode.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.17.3 [10-3] DDI / DID Table
Programming Manual References
2.9.8 [2-6-1] Numbering Plan—Main
2.17.4 [10-3] DDI/DID Table—Automatic Registration
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.30.1 TIE Line Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending
on the time of day.
Value Range
For KX-TDA30/KX-TDA100/KX-TDA200:
1–8
For KX-TDA600:
1–32
Maintenance Console Location
2.17.3 [10-3] DDI / DID Table
Programming Manual References
2.9.5 [2-4] Week Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the DID destination is the floating
extension number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the
caller.
2.17 [10] CO & Incoming Call
PC Programming Manual 771