Panasonic KX-TDA100 Pc Programming Manual page 174

2.8 [1] Configuration
telephone number is dialled, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialled digits one at a time.
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
2.8.1 [1-1] Slot
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension Inter-digit
2.9.17 [2-9] System Options—Option 2—ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
2.10.4 [3-1-4] Dialling Plan
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
ISDN Centrex
Enables the use of the telephone company's ISDN Centrex Service features.
Value Range
Disable, Enable
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
BRI Data Link (P-MP) Mode
Assigns one or two TEIs (Terminal Endpoint Identifier) to the BRI CO port. To use the ISDN Hold
supplementary service with point-to-multipoint configuration, this parameter should be set to 2-link
in some countries/areas.
Value Range
1-link: One TEI is assigned to the BRI CO port.
2-link: Two TEIs are assigned to the BRI CO port. (Available when Access Mode on the Network tab
is set to P-MP.)
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
174 PC Programming Manual