Panasonic KX-TDA100 Pc Programming Manual page 129

DPT Type—VM Port No.
Specifies the VM port number for the port. This setting is only available when Port Type on this
screen is set to DPT or S-Hybrid.
Value Range
For KX-TDA30:
1–4
For KX-TDA100/KX-TDA200/KX-TDA600:
1–12
Maintenance Console Location
2.8.5 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
1.24.1 Voice Mail (VM) Group
Headset OFF/ON
Turns on or off the use of a headset with a DPT. This setting is only available when Port Type on this
screen is set to DPT, DPT(S-DPT), S-Hybrid, or S-Hybrid(S-DPT).
Value Range
Headset OFF, Headset ON
Maintenance Console Location
2.8.5 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
1.11.4 Headset Operation
Ringing Tone
Selects the dual-tone switching pattern of the ring tone for incoming calls. This setting is only available
when Port Type on this screen is set to DPT, DPT(S-DPT), S-Hybrid, S-Hybrid(XDP), S-
Hybrid(SLT) or S-Hybrid(S-DPT). This setting is not available for the KX-T7200, the KX-T7451,
APTs, or SLTs.
Value Range
A: 64 ms (697 Hz), 64 ms (852 Hz)
B: 32 ms (697 Hz), 32 ms (852 Hz)
C: 128 ms (697 Hz), 128 ms (852 Hz)
D: 32 ms (697 Hz), 96 ms (852 Hz)
2.8 [1] Configuration
PC Programming Manual 129