Utility-System Reset-Reset By The Command - Panasonic KX-NCP500 Pc Programming Manual

•
Time setting
•
CS program download requests
•
File deletion
When a function other than those listed above, that cannot be performed while timed update has been set, is
selected, an error message will be displayed.
To turn this utility on:
1.
From the Utility menu, select Card Software Timed Update.
2.
Select the Set option.
The time setting box will become available.
3.
Enter the desired time using the number keys.
Click in the hour or minute field and use the up and down arrows to adjust the displayed time in increments
of one unit.
4.
Click Apply.
A message box will be displayed.
5.
Click Yes.
To turn this utility off:
1.
From the Utility menu, select Card Software Timed Update.
2.
Select the Off (Cancel) option.
3.
Click Apply.
A message box will be displayed.
4.
Click Yes.
2.6.22 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD memory
card, and resets the connected PBX.
This option is only available at Installer level.
Two copies of each of the main system files can be stored on the SD memory card. The names of these files
are as follows:
File Name
DBSYS
DBSYS_S
PBMPR
PBMPR_S
When new DBSYS and PBMPR files are transferred from a connected PC to the SD memory card using the
File Transfer PC to PBX (SD Card) utility (see 2.6.2 Utility—File Transfer PC to PBX (SD Card)), they are
stored as the backup files. To use these files on the PBX, it is necessary to first swap them with the currently
active files on the SD memory card.
To update system files and reset the PBX
1.
From the Utility menu, point to System Reset and then click Reset by the Command.
2.
Choose whether to back up current system data or not.
•
Click SD Backup to back up the current system data to the SD memory card before proceeding.
Document Version 2009-12
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the IPCMPR board of
the PBX.
Backup PBX program file
2.6.22 Utility—System Reset—Reset by the Command
PC Programming Manual 59