Panasonic KX-TDA100 Pc Programming Manual page 173

Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
2.8.15 [1-1] Slot—Port Property - BRI Port—Connection Command
Feature Guide References
None
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
None
ISDN Outgoing Call Type
Selects the method used to send dialled digits to the network.
Value Range
En-bloc: The PBX sends all of the dialled digits at once after the extension user completes dialling.
The PBX recognises the end of dialling when (1) # is dialled, if programmed, (2) a preprogrammed
2.8 [1] Configuration
PC Programming Manual 173