Fuji Xerox ApeosPort-II C7500 Administrator's Manual page 196

6 System Settings
Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
Clear Field
Deletes all information for the selected address.
Keyboard
Select one of [Recipient Name], [Server], [Save in], [User Name], and [Password] and press
the button, to display an input screen.
The numbers of characters you can input are as follows.
Recipient Name: Up to 36 characters
Server: Up to 64 characters
Save in: Up to 128 characters
User Name: Up to 32 characters
Password: Up to 32 characters
For detail information, refer to "Job Flow Sheets" (P.190).
Transfer via SMB (1), Transfer via SMB (2) (ApeosPort series models)
Transfer via SMB (2) will appear when Transfer via SMB (1) is configured.
Specify where SMB forwarding is to be stored.
Address Book
When the server address is registered in Address Book, you can specify the address from
Address Book. The specified address appears in the [Transfer via SMB] screen.
For information on Address Book, refer to "Address Book" (P.196).
6
File Format
Specify an output file format.
For information on file formats, refer to "4 Scan" > "General Settings" > "File Format(Selecting the
Format of Scanned Data)" in the User Guide.
Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
Resend Attempts
Set the transmission retry count in the range of 1 to 5.
Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
Clear Field
Deletes all information for the selected addresses.
Keyboard
Select one of [Recipient Name], [Server], [Shared Name], [Save in], [User Name], and
[Password] and press the button, to display an input screen.
The numbers of characters you can input are as follows.
Recipient Name: Up to 36 characters
Server: Up to 64 characters
Shared Name: Up to 128 characters
Save in: Up to 128 characters
User Name:
For domain users: Up to 97 characters with the format of "user name@domain name" or
"domain name\user name"
(the user name and domain name must be up to 32 and 64 characters, respectively)
For local users: Up to 32 characters
Password: Up to 32 characters
194