Table of Contents
Advertisement
14 Problem Solving
Error Code
124-708
124-709
133-700
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
14
364
Category
C P S M O
O [Cause]
[Remedy] For 1), check if the specified size paper is loaded in the tray.
[Remedy] Contact our Customer Support Center. Any trays other than
O
[Cause]
[Remedy] Reduce the number of pages, or cancel the stapling setting,
O
[Cause]
[Remedy] Check the staple position, and try again.
Cause and Remedy
The output destination was changed to the center tray.
One of the following may be the cause:
1) Paper of different size from the specified size is loaded for
2-sided copying.
2) The punching feature of C-Finisher is out of order.
For 2), confirm that an error code 012-231, 012-232, 012-233,
or 012-234 is displayed on the touch screen, and contact our
Customer Support Center.
the defective output tray can be used.
The document exceeded the maximum number of pages that
can be stapled.
then try to print again.
The staple or punch setting was cancelled.
Advertisement
Chapters
Table of Contents
