6 System Settings
4
Select [Features] or [Settings].
5
Select the feature to be displayed,
and select [Save].
6
Repeat steps 3 to 5 as required.
7
Press [Save].
Features
The feature buttons in tabs other than the [General Settings] screen can be displayed
on the [General Settings] screen.
Settings
The setting value of the feature buttons in tabs other than the [General Settings] screen
can be displayed on the [General Settings] screen, and selected directly on the screen.
Preset Buttons
Paper Supply - Button 2 - 5
For the feature buttons appearing in [Paper Supply] on the [General Settings] screen, you can
set the paper tray.
6
Reduce/Enlarge - Button 3 - 5
For the feature buttons appearing in [Reduce/Enlarge] in the [General Settings] screen, you
can set the ratio.
You can select the ratio from the registered R/E Preset buttons.
Copy Defaults
This sets the default settings of copy feature settings. When the power is turned on or
the machine returns from a Power Save mode, or when the <Clear All> button is
pressed, the system returns to the defaults set here. By setting features you often use
as defaults, you can avoid extra operations required in use.
Paper Supply
Set the default value for [Paper Supply] in the [General Settings] screen.
When the default value of [Reduce/Enlarge] is set to [Auto %], [Auto Paper] cannot be
selected for [Paper Supply].
Reduce/Enlarge
Set the default value for [Reduce/Enlarge] in the [General Settings] screen.
Select the ratio from [100%], [Auto %], and the buttons registered as R/E Preset buttons.
When the default setting for [Paper Supply] is [Auto Paper], [Auto %] cannot be selected for
[Reduce/Enlarge].
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.153).
146