Hp-Gl2 Emulation - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

HP-GL2 Emulation

This section explains how to operate the HP-GL mode menu and the settings that can
be made with it.
HP-GL Settings List
Items that can be set using the HP-GL mode menu are explained in two groups: basic
settings and advanced settings.
Basic Settings
Document Size 101
Paper Size 102
Paper Tray 103
Coordinate 104
Rotation
99 (Default): Auto
100: Paper
0: A0
1: A1
2: A2
3: A3
4: A4
5: A5
10: B0
11: B1
12: B2
13: B3
14: B4
15: B5
Sets the document size created by a PC client. When Auto (99) is
specified, the document size is determined based on the Scaling Mode
setting (the item number 160).
99: Auto
101 (Default): A Size
3: A3
4: A4
5: A5
14: B4
15: B5
Sets the paper size to be printed. This can be set if the paper tray setting
is either "Auto" or "Tray 5 (Manual Feed)". In addition, settings can only
be made for cut paper. When Auto (99) is specified, the paper size is
determined based on the Scaling Mode setting (the item number 160).
0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Manual Feed
6: Tray 6 (HCF)
Sets the paper tray to be used for printing.
0 (Default): 0 degrees
1: 90 degrees
Sets the paper orientation for printing.

HP-GL2 Emulation

15
445