Table of Contents
Advertisement
Note
Receiving Buffer - Port 9100
Set the Port 9100 receiving buffer.
Specify a value within the range from 64 to 1,024 KB in 32 KB increments.
Delete Form
You can delete registered ESC/P-K forms.
Important • Although this screen can be displayed, the ESC/P-K form is not available on the machine.
1
Select [Delete Form].
2
Select the print mode to delete forms.
3
Enter the form number with the numeric keypad, and select [Confirm].
4
Check the form name, and select [Delete Data].
ESC/P
Delete ESC/P-K emulation forms.
Form Number
When you select an item to be deleted, you can enter the form number. Specify a form
number from 1 to 64.
Form Name
After you enter the form number and select [Confirm], the form name matching the entered
number appears.
Other Settings
You can make other settings relating to the paper used in the printer.
Print Area
Set whether to expand the print area.
For information about the printable area, refer to "Printable Area" (P.420).
Substitute Tray
When there is no tray containing the paper size selected by the automatic tray selection,
select whether or not to print replaced with paper loaded in another paper tray. In the event of
using substitute tray, set the size.
Note
Display Message
Does not use a substitute tray, but displays a paper loading message.
Use Larger Size
Replaces with the next larger paper size than that selected, and prints at the same size.
Use Closest Size
Replaces with the closest paper size to that selected, and prints. If necessary, the printing is
automatically reduced in size.
Note
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• When documents are printed using emulation such as ESC/P-K and HP-GL/2, this setting is
not valid and a message prompting you to load paper appears on the screen.
• If there is a client specification, the client specification takes precedence.
Print Mode Settings
6
171
Advertisement
Chapters
Table of Contents
