14 Problem Solving
Note
Paper jams in the Booklet Finisher D2
The following describes how to clear paper jams in the finisher when the Booklet
Finisher D2 (optional) is installed.
Paper Jams in the Tray 8 (Interposer)
Following describes how to clear paper jams in the Tray 8 (Interposer)
1
Press the <Cover> button.
2
Open the cover [1e], and then
14
remove the jammed paper and all
paper loaded in the Interposer.
Important • When two or more sheets of
Note
3
Fan the paper you removed
making sure that all four corners are neatly aligned, and then load them again.
384
• A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at the Lever 1d .......................................................................................................385
Paper Jams at the Lever 1b .......................................................................................................386
paper are loaded, remove all
of the sheets from the tray.
• If paper is torn, check for any
torn pieces of paper inside the
machine.