Installation When Using Usb Port; Preparations; Installation Overview; Configuration On The Machine - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

Installation When Using USB Port

Preparations

Prepare the following items to install the machine when using a USB interface.
USB cable
CD-ROM of the Driver CD Kit (provided with the machine)
USB port
Adobe PostScript 3 Kit (optional) - this is required only when using a Macintosh
computer

Installation Overview

To connect the machine directly with a computer using a USB cable, the following
configuration must be done:

Configuration on the machine

Configuring the USB port on the machine.
Configuration on a computer
Installing a print driver.
Configuration on the Machine
The following describes the configuration procedure to use a USB interface on the
machine.
Note
For the items that can be configured using CentreWare Internet Services, refer to "CentreWare Internet
Services Setting Items" (P.224).
1
Display the [System Settings] screen.
1) Press the <Log In/Out> button.
2) Enter the user ID with the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
Note
3) Select [System Settings].
4) Select [System Settings].
2
Enabling the USB port on the machine.
1) Select [Network Settings].
2) Select [Port Settings].
3) Select [USB], and select [Change Settings].
4) Select [Port Status], and select [Change Settings].
5) Select [Enabled], then select [Save].
• To print binary data by using a USB interface, set [Adobe Communication Protocol] to
[RAW].
• The configuration can also be performed using CentreWare Internet Services.
• The default user ID is "11111". When using the Authentication feature, a passcode is
required. The default passcode is "x-admin".

Installation When Using USB Port

8
223