Fuji Xerox ApeosPort-II C7500 Administrator's Manual page 331

Category
Error Code
C P S M O
016-526 O
016-527 O
016-533
016-534
016-539
016-546
016-574
O
016-575 O
016-576 O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
[Cause] LDAP server SSL authentication error. The server name does
not match the certificate.
[Remedy] Set the same LDAP server address to the machine and to the
SSL certificate of the LDAP server. This error can be cleared if
you select [Off] for [LDAP - SSL/TLS Communication] under
[SSL/TLS Settings] on the machine; however, note that
selecting this option will not ensure the validity of the LDAP
server.
[Cause] LDAP server SSL authentication error. This is an SSL
authentication internal error.
[Remedy] Software has a problem. Contact our Customer Support
Center.
O [Cause] Kerberos server authentication protocol error
[Remedy] The time difference between the machine and the Kerberos
server exceeded the clock skew limit value set on the
Kerberos server. Check if the clocks on the machine and
Kerberos server are correctly set. Also Check the settings of
the summer time and the time zone as well on the machine
and Kerberos server.
O [Cause] Kerberos server authentication protocol error
[Remedy] The realm set on the machine does not exist on the Kerberos
server, or the Kerberos server address set on the machine is
invalid for connection. Check if the realm name and the server
address have been correctly set on the machine. For
connection to Windows 2000 or Windows 2003 Server, specify
the realm name in uppercase.
O [Cause] Kerberos server authentication protocol error
[Remedy] An error occurred on the software. Contact our Customer
Support Center.
O [Cause] A general user tried to obtain the information of another user.
[Remedy] Contact our Customer Support Center.
[Cause] The machine failed to transfer data using [FTP] of the [Scan to
PC] feature because the host or server name of the FTP
server could not be resolved.
[Remedy] Check the connection to the DNS server. Check if the FTP
server name is registered correctly on the DNS server.
[Cause] The machine failed to transfer data using [FTP] of the [Scan to
PC] feature because the DNS server address was not
registered.
[Remedy] Specify the correct DNS server address. Or, specify the
destination FTP server using its IP address.
[Cause] The machine failed to transfer data using [FTP] of the [Scan to
PC] feature because it could not connect to the FTP server.
[Remedy] Ensure that both the destination FTP server and the machine
are available for network communications, by checking the
following:
The IP address of the server is set correctly.
The network cables are plugged in securely.
Cause and Remedy
Error Code
14
329