Replacing The Staple Cartridge For C-Finisher Or C-Finisher With Booklet Maker - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

3 Maintenance
13
Press the both ends of the drum
cartridge to place it in a horizontal
position.
Note
14
Remove the film on the drum
cartridge.
3
15
Insert the unit completely and
return the handle to the original
position.
16
Return the lever R1-R4 to the
original position.
17
Close the front cover.
Note
Replacing the Staple Cartridge for C-Finisher or C-Finisher with Booklet
Maker
When the C-Finisher (optional) or the C-Finisher with Booklet Maker (optional) is
installed and it is time to replace the staple cartridge, a message appears on the touch
screen. When this message appears, replace the staple cartridge with a new one.
This section explains how to replace the staple cartridge in the C-Finisher with Booklet
Maker. Use the same procedures for the C-Finisher.
Important • The use of staple cartridges not recommended by Fuji Xerox may impair quality and
Note
54
• Make sure that the marks (
and ( ) face each other.
• A message will be displayed and the machine will not operate if the front cover is even
slightly open.
performance. Use only staple cartridges recommended by Fuji Xerox for the machine.
• To order a staple cartridge, contact our Customer Support Center.
)