Changing The Paper Size; Changing The Paper Size For The Trays 1 To 2 - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

Changing the Paper Size

The following describes how to change the paper size for the Trays 1 to 4 and 6.
Note
For information about changing the paper types, refer to "Changing the Paper Settings" (P.38)

Changing the Paper Size for the Trays 1 to 2

Following describes how to change the paper size for the Trays 1 to 2.
1
Pull out the tray towards you until it
stops.
Important • Make sure to pull out the tray
2
Remove any paper loaded on the tray.
3
Hold the long-side paper guide and
slide it to the desired paper size (1).
Hold the short-side paper guide on
the right side and slide it to the
desired paper size (2).
4
Load and align the edge of the
paper against the left edge of the
tray with the side to be copied or
printed on facing down.
Important • Do not load paper exceeding
• The paper types for the Trays 1 to 4 and 7 are preset. Normally, plain paper is set. When
replacing the loaded paper with other types of paper, change the paper type settings to
match the type of paper to be loaded to maintain print quality.
•
slowly. When the tray is being
pulled out with force, the tray
may possibly hit your knees or
other parts of your body
causing injuries.
• While the machine processes
a job, do not pull the tray out
that the job uses.
• Do not add a new stack of paper on top of the remaining paper in the tray, in order to prevent
paper jams or any other troubles. First, remove the remaining paper in the tray, then load the
new stack of paper.
the maximum fill line. It might
cause paper jams or machine
malfunctions.
• Do not place any paper or
things in the empty space on
the right side of the Tray 1 or 2.
It may cause paper jams or
machine malfunctions.

Changing the Paper Size

2
1
33
2