Fuji Xerox ApeosPort-II C7500 Administrator's Manual page 318

14 Problem Solving
*:Refer to NetWare Online Documentation for configuration and operations.
When "Switch the machine off" is displayed
14
When the print output is not as you expected
316
Cause
The context is not set.
Connected to a different
printer object.
The NetWare port on the
machine is not set to
"Enable".
The file server is down.
There is another device on
the network with an identical
device name.
The NetWare port is not
functioning.
Cause
A NetWare problem
occurred.
Cause
The print language of the
print data and the print
language configured on the
machine are different.
Check point
Print out [System Settings
List] to confirm if the context
is specified.
Use NWADMIN from a
computer to confirm if the
correct object is assigned
using the layout information
of the print server.*
Print out [System Settings
List] to confirm if the
NetWare port is enabled.
Search for the file server
using [Network
Neighborhood].
Switch off the machine and
use NWADMIN from a
computer to confirm that the
status of the printer object is
"Standby".
Print out [System Settings
List] to confirm if the network
number is left to "0000000"
(NetWare server is down) if
using IPX/SPX. If using TCP/
IP, confirm if the IP address
is left to "0.0.0.0" (static
address unspecified, or the
DHCP server is down).
Check point
-
Check point
Confirm the print language
on the machine.
Remedy
Set the context.
Use Driver CD Kit CD-ROM
from a computer to correctly
set the file server name/tree
name/context/active mode.
Use CentreWare Internet
Services from a computer to
correctly set the file server
name/tree name/context/
active mode.
Enable the NetWare port.
Start the file server.
Use the Driver CD Kit CD-
ROM from a computer to set
a different device name.
For the case of IPX/SPX,
start the NetWare server. For
the case of TCP/IP, either
set a static IP address or
start the DHCP server.
Remedy
Restart the machine.
Switch on the machine after
the display completely
disappears.
Remedy
Match the print language of
the print data and the print
language configured on the
machine.