Fuji Xerox ApeosPort-II C7500 Administrator's Manual page 82

4 Job Status
The following describes how to print and delete a document saved in Charge Print.
1
When printing the stored jobs, the
authentication is required. Press
the <Log In/Out> button. Enter the
target user ID using the numeric
keypad or the keyboard displayed
by pressing [Keyboard], and select
[Confirm].
When deleting the stored jobs, the
authenticaiton in not required.
2
Select [Charge Print].
3
Select the user to be checked, and
select [Document List].
Note
4
4
Enter the passcode, and select
[Confirm].
Note
5
Select the document to be printed
or deleted.
6
When printing, specify the number
of print using the numeric keypad.
7
Select any item.
Delete
Deletes the document stored with
Charge Print.
Refer to "When [Delete] is Selected" (P.81).
Print
Prints the document stored with Charge Print.
Refer to "When [Print] is Selected" (P.81).
80
• Select [Refresh] to display the
updated information.
• Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
• Entering a 3-digit user ID with
the numeric keypad specifies
the user directly.
• If no passcode is assigned,
the passcode entry screen will
not appear.