Private Charge Print - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

When [Delete] is Selected
1
Select [Yes].
Yes
Deletes the document.
Important • Once the document is
No
Cancels deleting the document.
When [Print] is Selected
1
Select what to do with the
document after printing.
Print and Delete
Starts printing the document. After
printing, deletes the document.
Print and Save
Starts printing the document. After printing, the document remains undeleted.
Cancel
Cancels printing the document.

Private Charge Print

When you set to use the Private Charge Print feature, received print jobs are saved for
each authentication user ID.
Note
For more information, refer to "Charge / Private Print Settings" (P.206).
The following describes how to print or delete a document stored with the Private
Charge Print feature.
1
Press the <Log In/Out> button.
deleted, it cannot be restored.
• This item is displayed when the Private Charge Print feature is enabled by using one of the
following procedures:
- Select [Save in Private Charge Print] under [Receive Control].
- Select [According to Print Auditron] under [Receive Control], and then set [Job Login
Success] to [Save in Private Charge Print]. Under [Login Setup / Auditron Mode], select an
option other than [Off], and then set [Print Service] under [Auditron Mode] to [On].
• When deleting the print job instructed with an invalid user ID, display the list of print jobs in
the authenticated system administrator mode, and then select the job to be deleted.
For more information, refer to "Deleting the Print Job with an Invalid User ID" (P.83)
Printing and Deleting Stored Documents
4
81