04/SHOCK ABSORBER, SWINGARM
Installing the heim joint
6.16
Info
The operations are the same on the upper and lower heim joints.
–
Place special tool
cial tool
.
Pressing tool (T1206) (
Pressing tool (T129) (
200581-10
–
Mount lock rings
200579-11
–
Mount and grease seal rings
Lubricant (T158) (
200578-11
–
Press in both collar bushings of the heim joint.
Info
Because the collar bushings are different (
they are installed in the correct positions; see the photos.
If the collar bushings are installed incorrectly, the shock absorber will rub
against the swingarm.
200901-10
underneath and press the heim joint to the middle using spe-
p. 150)
p. 151)
on both sides.
on both sides.
p. 144)
thin,
thick), ensure that
30