Chapter 6 | Maintaining the Scopia XT
This chapter details the maintenance tasks required by administrators for ongoing use of the Scopia XT Series.
Navigation
•
Setting the Administrator PIN Code for the XT Series
•
Setting the User PIN Code for the Scopia XT Series Endpoint
•
Modifying the Username and Password for the Scopia XT Series Web Interface
•
Preparing for a Video Call or Videoconference
•
Enabling AT Commands for Managing the XT Codec Unit
•
Configuring the System for SNMP Management
•
Enabling Backup and Restore from Scopia Management
•
Updating Software for Scopia XT Series
Setting the Administrator PIN Code for the XT Series
About this task
You can modify the administrator PIN code required to access and modify advanced settings, such as
defining camera or network settings. You can do this procedure from the endpoint itself or from the XT
Series web interface.
The default PIN is 1234. We recommend that you change the administrator PIN when starting the
system configuration to prevent users from changing settings by mistake.
You can also set a user PIN code to access basic settings, such as the language displayed on the
interface, as described in
To modify the web username and password for the XT Series, see
Password for the Scopia XT Series Web Interface
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
To modify the PIN, you must be connected via HTTPS (see
Scopia XT Series
Procedure
1. Access the PIN settings, as follows:
Administrator Guide for Scopia XT5000 Series Version 3.2
Series
on page 127
on page 135
on page 138
Setting the User PIN Code for the Scopia XT Series Endpoint
on page 33).
on page 123
on page 124
on page 125
on page 134
on page 137
Modifying the Username and
on page 125.
on page 44.
Enabling Remote Management on the
Maintaining the Scopia XT Series | 123
on page 124.