Deleting Xt Series Certificates - RADVision scopia xt5000 series Administrator's Manual

2. To back up a certificate to the USB key, select Advanced > Utilities > Certificates >
3. If you select Backup and Remove, the system first copies the certificates and associated
4. To restore a certificate into the system, select Advanced > Utilities > Certificates >

Deleting XT Series Certificates

About this task
This section explains how to remove or uninstall a certificate from the XT Series using the web interface.
You might need to remove certificates if:
• For privacy reasons, you do not want to keep your certificates on a shared endpoint.
• The system generated errors while creating the CSR and you want to replace it with a new one.
• You want to use a different CA for signing your certificates.
• You changed the system's IP address.
To secure SIP connections using TLS certificates, your system must have a static IP address,
since the system generates the certificate request using its IP address as the Common Name
(CN).
Administrator Guide for Scopia XT5000 Series Version 3.2
Figure 66: Connecting a USB Key to the XT Codec Unit
Backup (Figure 67: Backing up or restoring certificates
The system copies the certificates and associated keys to the root folder of your USB key.
Figure 67: Backing up or restoring certificates
keys to the USB key and then removes them from the XT Codec Unit.
Restore (Figure 67: Backing up or restoring certificates
restores the certificates and associated keys to the system.
Important:
on page 117).
on page 117). This automatically
Securing your Scopia XT Series | 117