Accessing The Scopia Xt Series Main Menu - RADVision scopia xt5000 series Administrator's Manual

Accessing the Scopia XT Series Main Menu

About this task
After switching on the Scopia XT Series, the main menu appears and you can do the following:
• Make audio and video calls
• View contacts in the phone book
• Start sharing content from your computer
• Adjust the camera position. You can also store the position to retrieve it later.
• Record your videoconferences
• Perform basic configuration, such as setting the interface language
• Set your preferences, such as activating the Do Not Disturb feature
• Check the system status
You navigate Scopia XT Series menus using arrow keys and pressing the ok/menu key on the XT
Remote Control Unit (for details, see
Procedure
1. Verify that the LED on the front panel of the XT Codec Unit is blinking.
2. Turn on the XT Codec Unit by pressing the
3. The system home page appears on the monitors, and you can access the following menus:
Administrator Guide for Scopia XT5000 Series Version 3.2
Using the XT Remote Control Unit
• Call—make audio and video calls
• Contacts—view, edit, and call contacts in the phonebook
• Present—start sharing content from your computer
• Control Camera—adjust camera position
• Recording—start recording a videoconference
• Configure—perform basic configuration and check the system status
Important:
When you access the system for the first time only, the Quick Setup wizard is displayed
(for details, see Accessing the Quick Setup Procedure
on page 39).
Power key on the XT Remote Control Unit.
on page 54).
Getting Started with Managing the XT Series | 38